KYN28A-12(Z) Electrical withdrawable AC metalclad switchgear
KYN28 metal-clad switchgear (KYN28 enclosed metalclad switchgear) is a complete power distribution device for 3.6~12kV,3-phase AC 50Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc.,so as to control, protect and monitor the system.
Categories：
HV MV LV Switchgear
Specifications
KYN28 metal-clad switchgear (KYN28 enclosed metalclad switchgear) is a complete power distribution device for 3.6~12kV,3-phase AC 50Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc.,so as to control, protect and monitor the system.
The switchgear adheres to standards of IEC60298,GB3906-91 “ A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV”.
Code and implication
Working environment
Ambient Temperature: -15℃～+40℃.
Altitude: Not above 3500 meters.(Altitude:4000M--3200M, pass IEC standards type test)
Relative Humidity: Daily average is not more than 95% and monthly average is not more than 90%;
The average daily vapour pressure is not more than 22KPA;
The average monthly vapor pressure is not more than 1.8KPA;
Seismic Intensity Scale: not more than 8 Liedu scale.
No obvious contamination with corrosive or combustible gases on site.
Don’t be used on frequent intense vibration site.
Note: When the working environment is out of the scope mentioned above, the user may consultant with us for the solution.
Key words:
KYN28A-12(Z) Electrical withdrawable AC metalclad switchgear
Previous
Previous
Qualification Patent
Aisite Electric Group has passed CE, TYPE TEST, ISO9001, ROHS, REACH, CQC, GOST and many other authoritative certifications.
ISO 9001 2015
ISO 14001 2015
ISO 45001 2018
Product certification certificate
Product certification certificate
Get A Quote
Leave your contact information and get a free product quote
Related Products
Aisite Electric Group has passed CE, TYPE TEST, ISO9001, ROHS, REACH, CQC, GOST and many other authoritative certifications.
6 pulse high overload medium frequency furnace dedicated transformer
Induction Furnace has coil constructed from heavy copper tubing. It is designed and tuned to the inverter circuit which applies a medium frequency (generally 500 Hz or 1000 Hz) voltage to the Induction coil. The magnetic field produced by the induction coil induces eddy currents in the charge and heats it. Medium frequency is necessary to enhance the rate of heat generation.
12 pulse high overload medium frequency furnace dedicated transformer
Induction Furnace has coil constructed from heavy copper tubing. It is designed and tuned to the inverter circuit which applies a medium frequency (generally 500 Hz or 1000 Hz) voltage to the Induction coil. The magnetic field produced by the induction coil induces eddy currents in the charge and heats it. Medium frequency is necessary to enhance the rate of heat generation.
12 pulse heat sink high overload medium frequency furnace special transformer
Induction Furnace has coil constructed from heavy copper tubing. It is designed and tuned to the inverter circuit which applies a medium frequency (generally 500 Hz or 1000 Hz) voltage to the Induction coil. The magnetic field produced by the induction coil induces eddy currents in the charge and heats it. Medium frequency is necessary to enhance the rate of heat generation.
Induction Furnace Transformers
Induction Furnace has coil constructed from heavy copper tubing. It is designed and tuned to the inverter circuit which applies a medium frequency (generally 500 Hz or 1000 Hz) voltage to the Induction coil. The magnetic field produced by the induction coil induces eddy currents in the charge and heats it. Medium frequency is necessary to enhance the rate of heat generation.